Already in the evening before the I / O, mason of sons in the frame of the IAAPA Summer Meeting to a factory examination had loaded. After two presentations of Disney and universally to the backgrounds in the origin of new attractions a leadership followed through the factory buildings, in which just the rails were made for the XS Coaster Hollywoods Rip, Ride, Rockit in the universal studios Floridas.
The train will show a layout very long stretched with approximately 1150 stretch meter because it extends along existing buildings of the well known film park. With seven tandem trains to twelve places apiece, the necessary capacity is reached of 1850 passengers per hour. Accompanies becomes the trip of an Onboard Soundsystem in the head support, that has develops universally itself and will supply. An Onboard video camera will record the passengers whereby the possibility is offered to acquire a music video at the end of the trip. In addition the trains with gigantic LED lamp areas will be equipped, that can change its color.
Universally a train with Thrill wanted, but without inversion. The result is a 51 meter of high vertical elevator with subsequent departure of 75 degrees. The so-called Non Inverted Loop, that differs of a conventional Vertikallooping, follows it, in that the upper part was replaced by a screw. In the highest point in almost 42 meter heights the train does not stand therefore head, but rather revolves once around that longitudinal axis to submerge there around then into the departure - certainly an interesting load experience if also of Intamin in Tusenfryd with the Norwegian Loop already similarly realized. The long stretched layout offers further four Artime elements, steep curves and nearly collision with the existing Filmsets. The trains with 2 vehicles apiece should reach a maximal speed of 105 km/h.